LED UFO Mosquito killer lamp, 2 in 1 bug Zapper

How to install

1. Ceiling mounting

l Connecting the Quick connection cable with power line ;

l Mark the location of the holes of Ceiling mounting plate on the ceiling, drill Φ5mm holes and insert the plastic expansion tubes in. 

      Place the Ceiling mounting plate in place and tight the two screws. If the ceiling is wooden, no need to drill holes. Just fix the ceiling

      mounting plate to the wooden ceiling with the two self-drilling screws. Please take care the location of the power line before 

      you drilling holes and driving the screws.

l Connect the Quick connection cable with lamp body and then turn in clockwise direction to fix the mounting plate and lamp. 

      You will hear tiny “click” sound when they are firmly connected.

2. Lamp holder install.

l Connect quick connection terminal between Lamp holder base and Lamp body.

l Turn the base clockwise and you will hear tiny “click” sound when they are firmly connected.

l Connect the whole lamp to your existing lamp hold base.

How to use

Take the device out of its packing and check whether it or its components show any signs of damage. Should this be the case, do not use the device.

l This lamp kills flies, gnats and mosquitoes using a short electric shock at the high-voltage grid;

l Three Working mode (Achieved by turn on-off your switch continuously)

     a.Turn on for 1^st time: Lighting only;

b.Turn OFF - ON for 2^nd time: Mosquito killing only

c. Turn OFF-ON for 3^rd time: Lighting + mosquito killing

l To get better mosquito killing effect, please leave the UV light on before you enter the room;

l Suggested usage:

n Place: Room, Balcony, Corridor, Porch, Shop, Farms;

n Choose Fresh lamp according to the commodity in your shop, e.g. Red+ 6500K for red meat.

l Cleaning: Remove gnats and mosquitoes by shaking the plug over a waste bin.